
鋁合金耐張線夾NXL-1NXL系列楔型耐張線夾適用于10kV及以下配電線路中,將架空絕緣鋁導線或裸鋁導線固定在轉角或終端固定在轉角或終端耐張桿的絕緣子上,從而將架空導線固定或拉緊,絕緣罩與耐張線夾配套使用,起絕緣防護作用。
NXL Series strain clamp (wedge type)is suitable for distribution wire up to 10kV,fixing the aerial insulation aluminium conductor or naked aluminium conductor on the rotate angle or insulator of terminal strain pole, and then fixing and tighting the aerial conductor ,insulation cover and strain clamp are used together. It’s action is insulation protection.
●鋁合金耐張線夾NXL-1結構特點 Structure feature
1、選用非磁性高能強度抗氧化鋁合金材料
2、無電能損耗,是節能認證產品
3、楔塊鎖緊結構,安裝簡便可靠
4、圓弧在面積包緊,導線不易蠕變、握力大
●鋁合金耐張線夾NXL-1絕緣罩性能特點Insulation cover performance feature
1、工頻耐壓:≥18kV 保壓1分鐘不擊穿
2、絕緣電阻:>1.0×1014Ω
3、環境溫度:-30℃~90℃
4、耐氣侯性能:經人工氣侯老化試驗1008小時后性能良好
1、Withstand voltage: ≥18kV keep voltage one minute not break down
2、Insulation resistance: >1.0×1014Ω
3、Environments temperature: -30℃~90℃
4、Weather proof performance: have good performanced after 1008 hours artifical climate aging test.
●鋁合金耐張線夾NXL-1規格及技術參數 Specification
規格型號 type size | 導線截面積 section(mm2) | 剝皮長度 Length (mm) | 握力 Grip strength (kN) | 破壞負荷 Failure load (kN) | 配套絕緣 罩型號 Insulation cover type | ||
剝皮 | 不剝皮 | 剝皮 | 不剝皮 | ||||
NXL-1 | 50 | - | 245 | 5.16 | 3.40 | 14.5 | NXL-95 |
70 | - | 7.12 | 4.60 | ||||
95 | - | 9.40 | 6.70 | ||||
NXL-2 | 120 | 35-70 | 255 | 12.70 | 8.90 | 23.4 | NXL-150 |
150 | 15.20 | 11.30 | |||||
NXL-3 | 185 | 70-120 | 300 | 18.50 | 13.60 | 36.3 | NXL240 |
240 | 23.60 | 17.30 | |||||
NXL-4 | 300-400 | 150-240 | 320 | 55.00 | 22.50 | 61.0 | - |
NXL-5 | - | 300-400 | 350 | 65.00 | 30.30 | 68.0 |